TOWARDS A SAFER PLANET
SAFEDISINFECTINGINC
A minority & women owned small business (MBE/WBE)
SAFETY PRODUCTS
A MULTI-TIERED APPROACH TO DISINFECTING AND FUTURE-PROOFING
Our Air Monitoring system does a deep analysis of the air quality in your environment
The Foton Defender™ Far UV-C 222 nm products for use in areas where humans are present during the disinfection process.
The UV Chamber and Robots – 254 nm products are used for high volumetric output disinfection
providing immense power in a short amount of time.
The most sophisticated line of Electrostatic Sprayer Systems on the market.
No disruption into existing infrastructure – can run on multiple types of electrical systems.
Future-proof against emerging variants including
Respiratory Syncytial Virus (RSV), Covid-19 variants and mutations, Avian Flu, Influenza,
Monkeypox, SARS, Ebola, MRSA, the common cold, etc.
THE FOTON DEFENDER™
The Far UV-C 222 nm Foton Defender™ is our Flagship innovation, manufactured in the USA
The Foton Defender™ is a Far UV-C 222 nm revolutionary decontamination device. Our green and eco-friendly Foton Defender™ disinfects surfaces and airborne viruses, bacteria and spores, and can do so while still having people in the same room
The Foton Defender™ disrupts the DNA & RNA of pathogens thereby stopping their replication and mitigating the spread
Easy to install with minimal maintenance
Works with standard building electrical systems
Available in two configurations: The Wall Unit, and In-Ceiling Unit
Proven Efficacy – Environmentally friendly
With a wide 60 degrees irradiation pattern, it is highly effective in decontaminating a large area
Adaptation is our priority. When ceilings are too high we create new adaptive models to custom-fit any environment including our unique mobile units.
Here you can see our Foton Defender™ adapted into a Wall Unit, one of our adaptive models
Foton Defender Wall Unit Specifications
10 5/8 “H x 6 3/8″ W x 5 5/8” D
Weight 3 lbs. 1 oz
Electrical: 120-277 VAC, .5 AMPS, 50/60 Hz
Future-proofing
Against emerging variants including Respiratory Syncytial Virus (RSV), Covid variants and mutations, Avian flu, Influenza, Monkeypox, SARS, MERS, Ebola, the common cold, etc.
Absenteeism and Employee Retention
By putting preventative disinfection measures in place will help keep employees and customers safe from colds, viruses, influenza, Covid, etc. resulting in lower absenteeism
Improve Productivity
And help increase your bottom line
PRODUCT CONFIGURATIONS
IN-CEILING
- Comes with 2ft x 2ft OR 2ft x 4ft Metal troffer for quick installation
- Hard wired model – can be hard wired directly to the facility electrical system
- Wall outlet – plug into local outlet
Dimensions and weight
- Height (H): 24″ (60.69 cm)
- Width (W): 24″ (60.96 cm)
- Depth (D): 8″ (20.32 cm)
- Weight: 5.5 lbs (2.5 kg)
Electrical options
- 120 VAC @ 0.5 A, 50 Hz
- 240 VAC @ 0.5 A, 50 Hz
- 277 VAC @ 0.5 A, 50 Hz
WALL MOUNT
- Hard wired model – can be hard wired directly to the facility electrical system
- Wall outlet – plug into local outlet
Dimensions and weight
- Height (H): 10 5/8″ (26.99 cm)
- Width (W): 6 3/8″ (16.19 cm)
- Depth (D): 5 3/8″ (13.65 cm)
- Weight: 3 lbs 1 oz (1.41 kg)
Electrical options
- 120-277 VAC, .5 AMPS, 50/60 Hz
CERTIFICATIONS
Operating within ACGIH and IEC International UV standards
SUSTAINABILITY
- Carbon neutral footprint producing no emissions or environmental waste
- Mercury-free and made from recyclable parts
AIR MONITOR
Precision monitoring down to the 0.1 micron range. SDI’s Air Monitor continuously monitors the air, detecting and analyzing the data with meticulous standards. What is really unique, is its ability to detect particles as small as 0.1 micron, the size range of airborne pathogens, also referred to as the viral load range by infection control professionals.
But it does so much more…
In accordance with the EPA, it measures the air in AQI or “Air Quality Index”. It also monitors mold to prevent mold damage in your building, relative humidity, temperature, carbon dioxide and even TVOC’s (Total Volatile Organic Compounds) – airborne agents that act as carriers for viruses and pathogens.
A small list of what it can detect include: COVID-19, SARS, Flu, TB, Pertussis (responsible for respiratory disease), Norovirus, C-DIFF, MRSA, smoke, soot, pollen, dust, dander, mold and bacteria
POWER WASH DRONE
SDI P1 AND G1 POWER WASH DRONES
Industrial-strength power wash drone system that makes cleaning at heights faster, safer and more efficient. Instead of using lifts, the SDI Power Wash drone system makes it quick and easy to access and clean elevated structures.
The SDI Power Wash Drone uses industry-standard accessories (pumps, nozzles, hoses and power generators). Just hook it up to your equipment
SDI P1 POWER WASH DRONE SYSTEM
Heavy-lift P1 Drone
Battery Powered
Pressure up to 3500 psi (at the pump)
High output up to 8-10 GPM
Fly up to 190 ft (for soft wash) and up to 120 ft (for power wash)
SDI G1 POWER WASH DRONE SYSTEM (DUAL POWERED)
Heavy-lift G1 Drone
Ground-based power or battery-powered
Pressure up to 3500 psi (at the pump)
High output up to 8-10 GPM
Fly up to 190 ft (for soft wash) and up to 120 ft (for power wash)
Unlimited flight time with the option to fly on battery for short flights
ELECTROSTATIC SPRAYERS
ByoPro™ Mobile Cart System is designed with the end user in mind. The cart offers unlimited operating time and portability for maneuverability through building facilities, passenger transportation vehicles and countless other venues. The ByoPro™ is the perfect choice for establishments with high square footage where continuous use is necessary
ByoPack™ Backpack corded system is designed for unlimited run time for both, indoors and outdoors. Its design includes ergonomic back support and comfort. It is the perfect choice where mobility is necessary across varying environment and uneven floor surfaces.
Jet H2 Ultra™ Jet Ultra handheld applicator is a portable, battery-operated spraying device with plenty of power in a compact design. This model is ideal for confined or smaller spaces such as vehicles, restrooms, locker rooms, fitness areas and more. The Jet Ultra™ is the perfect choice for users looking for on-the-go air quality odor control and surface disinfection in any indoor space or outdoor environment.
Chemistry Overview™ Pairing the right chemistry with electrostatic sprayers are important for archieving effective air quality and effective surface disinfection or sanitization. Unlike traditional disinfectants that use harsh chemicals, Clean Republic’s electrochemically activated solution works by creating hypochlorous acid (HOCI). An effective disinfectant that is safe for humans, pets/animals, plants and the environment.
There is no need to evacuate or wait for the room to air out after each application. The Clean Republic chemistry solution breaks down quickly into water and salt, leaving no harmful residue behind. Clean Republic Disinfectant kills up to 99.999% of many viruses and bacteria and is effective against a broad spectrum or pathogens.
SD-120C UV-C DISINFECTION CHAMBER
The UV Disinfection Chamber was designed to disinfect personal belongings such as cell phones, laptops, keys, etc.
High intensity UVC lamps are positioned within the cabinet at the top and bottom producing short wave.
Ultraviolet light at 254nm to disinfect any exposed surface DNA and bacteria, leaving evidence
free of contamination prior to other forensic tests, analysis or procedures.
The user is protected by our cabinet doors & UVC absorbing window.
THE UV ROBOT
The Germicidal Ultraviolet C (UVC) disinfection products are designed to be
mobile. The products are shipped fully assembled and provides an easy to use and repeatable
process ensuring that your environment is completely treated with germicidal UVC light. The
compact and lightweight design was developed with efficacy, safety, durability in mind.
SECURITY PRODUCTS
BALLISTIC ARMOR WHITEBOARD PANEL
Designed to protect against rifle and special threat ammunition while also being a whiteboard, the Tactical Ballistic Whiteboard is superior protection against projectiles and blast fragments.
Its can be easily installed and deployed and can be easily moved from one place to another while also maintaining locking wheels to become completely stationary.
Teachers, board rooms and training facilities can use this panel as a whilteboard and double as a ballistic barrier to be locked into place in a classroom by the door in the event of an active shooter and essentially make the classroom bulletproof.
The panel features an NIK Certified Level III+ Steel Armor Plate which can stop 7.62 mm and 5.56 mm Green Tips and other Special Threat Ammunition. These certified Panels are then coated with Encapsaloc, an anti-ricochet, anti-splatting material, which dramatically mitigates the effects of collateral damage due to ricochets and spalling
Size 1: 32 x 72
Size 2: 36 x 72
Weight: 350 lb
TACTICAL BODY ARMOR
BALLISTIC LIGHTWEIGHT LEVEL III+ RIFLE SPECIAL THREATS ACTIVE SHOOTER KIT
Donning our Body Armor Rifle SPECIAL THREAT STEEL ACTIVE SHOOTER KIT Will mitigate the impact of an onslaught of high-velocity rifle rounds as well as absorb other blunt force trauma in an active shooter situation.
Our ballistic armor products are designed to stop street threats well beyond the requirements of the NIJ standards.
Welcome to our in-house proudly manufactured USA Made Lightweight Rifle Special Threats Steel Core Armor, stopping SS109 and Mild Steel Core AK47 rounds specified in the highly sought after DEA armor
The Lightweight Rifle Special Threats Steel Core Inserts comes in at an overachieving 5mm thickness, and 8.4 Lb per a plate and (+ or – 10% ) after our SelfSealing Polyurea coating is applied.
In addition, we deploy our latest technology for an effective high-performance polyurea coating to bring you a superior spall containment when equipped with our build-up spall coating option to further reduce the deflection of projectile fragments.
These Lightweight Rifle Special Threat plates have been through the toughest of tests beyond the velocities guided by the NIJ Standards to guarantee nothing but the best armor for our Civilians, Law Enforcement, First Responders, and all patriots with boots on the ground!
Level of Protection
The Level III+ AR600 Lightweight Armor is capable of stopping multiple rifle rounds as per NIJ 0101.06 level III+ – multi-hit protection against 5.56×45 M193, 5.56×45 M855
Size
The Level III+ Lightweight Hard Armor plates are available in 10×12″, 11×14″ or 6×8″ side plates
Weight
10×12 SAPI Cut = 5.9 lbs
10×12 Shooter Cut = 6 lbs. 11×14 SAPI Cut = 8.4 lbs11x14 Shooter Cut = 7.7 lbs.
6×8 single plate weight is 2.5 lbs
Colors
Black, Coyote, OD Green, Extra for Multi-Cam
Shelflife & Warranty
Our AR600 Level III+ Lightweight Armor has a shelf life of 10 years. Manufacturer will replace the armor free of charge to the customer.
BODY ARMOR LEVEL IV CERAMIC ACTIVE SHOOTER KIT
Donning our Body Armor NIJ Level IV Active Shooter Kit will mitigate the impact of an onslaught of multiple high-velocity rifle rounds as well as absorb other blunt force trauma in an active shooter situation.
Our field-tested ceramic armor plates are designed for effectiveness from common street threats far beyond the requirements of the NIJ Standard 0101.06 Level IV.
Level of Protection: Our Level IV Ceramic Hard Armor is capable of stopping 5.56mm NATO; .308 M80; 7.62×45; and up to the powerful .30-06 APM2 as per NIJ 0101.06
Size: The Level IV Ceramic Hard Armor Plates are available in 11×14″ 10×12″ or 6×8″ side plates
Weight
11×14 Single Plate weight is 9.24 lbs
10×12 Single plate weight is 6.3 lbs.
6×8 Single plate weight is 3.5 lbs.
Thickness
1.1 inches thick for all sizes
Colors
Black, Coyote, OD Green, Extra for Multi-Cam
Shelflife & Warranty
Our Level IV Ceramic Hard Armor has a shelf life of 5 years. The manufacturer will replace the armor free of charge to the customer.
Our affordable line of Tactical Body Armor NIJ Level IV Active Shooter Kit is aimed at mitigating the impact of an onslaught of multiple high-velocity rifle rounds as well as absorbing other blunt force trauma in an active shooter situation.
Although our Body Armor is Ceramic Level IV it is still light in weight, coming in at a little more than 6lb. It offers additional side/rib protection with space for 8×6 armor panels to protect the side of the body. It comes with optional mag pouches (right side of picture) and comes in 4 assortment of colors.
LEVEL IIIA FX770 SOFT ARMOR ACTIVE SHOOTER KIT
Rapidly transfer your Premium Plate Carrier Loadout into a Light-Weight 360 Degree Level IIIA Soft Armor protection Kit.
This Option allows you, the operator, to Have this Soft Armor Level IIIA protection without the need for hard armor plates.
There is no such thing as a compromise when it comes to body armor. You want top-of-the-line protection, and nothing less. These Soft Body Armor Inserts are the best bulletproof vest solution on the market for small arms fire, with a lightweight, low-profile build surpassing Level IIIA Body Armor quality standards.
As Level IIIA Soft Body Armor, our pliable, lightweight body armor inserts meet NIJ (National Institute of Justice)Level IIIA Body Armor specification as laid out in the Ballistic Resistance of Body Armor NIJ Standard-0101.06. This means that they will protect against a variety of small arms fire, including rounds from a 9 mm, .44 Magnum, .357 Magnum, .357 SIG, and ALL other handgun threats, in addition to 12 gauge shotguns (shell and slug).
The minimalist, lightweight ballistic plates are easy to conceal, but provide the stopping power you need to stay safe in any tactical combat situation, all without compromising agility or freedom of movement.
Our Soft-Body Armor Inserts are custom-made to be compatible with our Premium Plate Carrier, the industry’s #1 full system premium Plate Carrier.
Stay light, stay fast, stay ready with the FX770 NIJ 0101.06 Level IIIA Soft Armor Complete Kit.
Level of Protection
The Level IIIA Soft Armor is capable of stopping a variety of small firearms, including rounds from a 9 mm, .44 Magnum, .357 Magnum, .357 SIG, and ALL other handgun threats, in addition to 12 gauge shotguns (shell and slug).
Size
The Level IIIA Soft Armor Plates are available in 10×12″ and 11×14″ sizes.
Weight
1.1 lbs
Colors
Black, Coyote, OD Green, Extra for Multi-Cam
Shelflife & Warranty
Our Level IIIA Soft Armor has a shelf life of 5 years. The manufacturer will replace the armor free of charge to the customer.
TACTICAL RAPID DEPLOY IFAK (INDIVIDUAL FIRST AID KIT)
When treating an injury in the field, time is critical. Every second counts. You need to be ready when called upon to save the life of a team member, even perhaps your own.
SWAT – T Tourniquet
SOF Tactical Tourniquet
COMBAT APPLICATION TOURNIQUET (C-A-T) Gen 7
- ISRAELI Trauma Bandage
- 3” x 24” QuikClot Hemostatic Gauze “Stops The Bleed 5 Times Faster”
- Vacuum-Sealed 12’Z-PAK Gauze
- 2 Vented Hyfin Mini Chest Seal
- 3M Medical Tape
- Triage Marker
- Glow Stick
- CPR Mask w/ 1-Way Valve
- Hypoallergenic Nitrile Gloves
- RTS Tactical Trauma Shears
- Nasal Airway + Lubricant
SOF® TACTICAL TOURNIQUET & COMBAT APPLICATION TOURNIQUET (C-A-T)
Size: 3.5″ x 4.5″ x 8.25″
Weight: 180 g / 6.4 oz
BALLISTIC SHIELDS
TACTICAL LEVEL III+ RIFILE SPECIAL THREATS MINI SHIELD™
Most Armor Ballistic Shields deployed and in use among United States Law Enforcement Agencies are not rated to provide any protection against rifle fire.
The advantage of the Mini Shield™ is quick deployment and effective protection from street threats required by the DEA Body Armor Testing Protocols. This includes the calibers mentioned below
5.56 x 45 mm 62 gr. M855 (Green Tip)
Russian 7.62 x 39 mm 123 gr. MSC (M43)
7.62 x 51 mm NATO M80 FMJ
NIJ 0101.06 Level III+
WEIGHT AND SIZE
Small 11 lbs 12 x 18 inches
Medium 16.9 lbs 14 x 24 inches
Large 23.3 lbs 16 x 30 inches
SHELF LIFE AND WARRANTY
Our Ballistic Shields have a shelf life of 5 years. The manufacturer will replace them free of charge to the customer.
ACTIVE SHOOTER SWAT BALLISTIC SHIELD
The Active Shooter SWAT Ballistic Shield is cleverly designed to protect law enforcement in all active shooter situations including forced entry, hostage rescue and crowd control. It comes designed with a viewport and Improved Weapon Mount Platforms on each side of the shield so first responders can safely present their weapon and effectively neutralize single or multiple threats
The shield conforms to NIJ Level IIIA for ballistic protection against handguns, shotguns, blunt impact and flying fragments. It is also available upon request in Level III protection from high-velocity rifle rounds
WEIGHT AND SIZE
Level IIIA 24 x 36 is 15 lbs / Level III 24 x 36 is 38 lbs
Level IIIA 18 x 30 is 14 lbs / Level III 18 x 30 is 30 lbs
LEVEL OF PROTECTION
Level IIIA
- 99mm Fiocchi, 115-grain FMJ projectiles
- 9mm, 124-grain full metal jacketed (FMJ) projectiles
- .357 SIG 115-grain jacketed hollow point (JHP) projectiles
- .357 SIG 125-grain gold dot hollow point (GHDP) projectiles
- 44-mag., 240-grain semi-wadcutter gas checked (SWCGC) projectiles
- 9mm +P+, 127-grain supreme expansion technology (SXT) projectiles
- 5.7 x 28 mm 27-grain SS195 lead free hollow point (LFHP) projectiles
- 5.7 x 28 mm 40-grain Hornady V-Max (Blue Tip) projectiles
- 7.62 x 25 mm, 95-grain TOKAREV FMJ projectiles
- .40 cal., 95-grain Aguilla projectiles
LEVEL III
- 7.62 mm x 39 mm 123 gr
- Mild Steel Core & 5.56 mm x 45 mm
- 55 gr. M193
TACTICAL SWAT BALLISTIC SHIELD WITH VIEWPORT
TACTICAL Ballistic Shields are cleverly designed to protect law enforcement, first responders and SWAT teams in all active shooter situations including forced entry, hostage rescue and crowd control. It comes designed with a view port and a proprietary mix of Aramid Fibers and DSM Dyneema Lightweight materials. The ballistics are also encapsulated with Polyurea Rhino Coating for rugged user operations.
Heavy duty triangle ambidextrous handles
LED lighting system (optional)
Size: 24″ x 36″
Weight: 15 lbs
View port size: 4″ x 10″
LEVEL OF PROTECTION
Level IIIA
- 99mm Fiocchi, 115-grain FMJ projectiles
- 9mm, 124-grain full metal jacketed (FMJ) projectiles
- .357 SIG 115-grain jacketed hollow point (JHP) projectiles
- .357 SIG 125-grain gold dot hollow point (GHDP) projectiles
- 44-mag., 240-grain semi-wadcutter gas checked (SWCGC) projectiles
- 9mm +P+, 127-grain supreme expansion technology (SXT) projectiles
- 5.7 x 28 mm 27-grain SS195 lead free hollow point (LFHP) projectiles
- 5.7 x 28 mm 40-grain Hornady V-Max (Blue Tip) projectiles
- 7.62 x 25 mm, 95-grain TOKAREV FMJ projectiles
- .40 cal., 95-grain Aguilla projectiles
LEVEL III
- 7.62 mm x 39 mm 123 gr
- Mild Steel Core & 5.56 mm x 45 mm
- 55 gr. M193
weapons Detection Systems
- OPENGATE is the first and only fully open, active walk-through detection system, composed of two freestanding pillars
- Acoustic and optical signals, located at the top of the pillars, provide real-time status and alarm indications
- OPENGATE is the most portable, elegant, easy to position and ready to use weapons detection system. No installation, adjustment or assembly procedures
- OPENGATE power supply options either lithium ion batteries and/or standard wall outlet (110v)
- OPENGATE is extremely versatile and can be used at a variety of entrances or security checkpoint locations, either indoors or outdoors
- Detection target: Multi-caliber weapons and IEDs
- Operational use: Faster screening of people in transit with bags, backpacks and purses. Extremely high throughput. Integrated high-precision transit counter
- Applications: Stadiums, arenas, ballparks, theme parks, hospital, museums, theaters, convention centers, transportation hubs. In general, all places open to the public characterized by the need to screen large crowds
- Easy to relocate and quick to install. Only 25 pounds with less than one minute setup time. It does not require adjustments or the assemply of mechanical and electrical parts
- Detection and signaling parameters can be easily set via the OPENGATE app designed for smartphones or tablets and based on Android or iOS operating systems
REMOTE MANAGEMENT WITH OPENGATE® APP
- Easily set Detection and Signaling parameters via smartphone or tablet
- OPENGATE® app available via Android or iOS operating systems
SMD600 Plus MI2
Multi-Sensor Walk-through Detector
- Detection target: all-metal weapons (magnetic and non-magnetic, including light alloys) and all cellphones / smartphones
- Operational use: high throughput screening of people in street clothes, under standard checkpoint divestiture procedures
- Application fields: visitors to correctional facilities, access to data-sensititive meeting rooms, access restrictions enforcement of weapons and cell phones, loss prevention of electronic devices, corporate anti-espionage
PD240CB
Long-Range Hand-Held Metal Detection set
- Long detection range for standoff inspection
- Exceeds the NIJ Standard – 0602.02 detection requirements
- Search operations allowed even in close proximity of metal reinforced floors
- Large search area
- Uniform detection of magnetic and non-magnetic targets
- Full digital design: consistent performance and calibration-free operations
- Elegant, robust and ergonomic
SERVICES
Safe Disinfecting Inc. covers a total disinfection service for commercial and residential spaces. For facility sanitation and disinfection services, please contact us for estimates & assessments of your location.